Monday, September 24, 2007

Boot sector viruses and their prevention

boot sector viruses functions, spreading and problems

Boot sector viruses generally infect or substitute their own code for either the DOS boot sector or the Master Boot Record (MBR) of a computer. The MBR,  a small program running every time the computer starts up, controls the boot sequence and determines which partition the computer boots from, and the MBR generally resides on the first sector of the hard disk.

Thus, the MBR executes every time a computer is booted and eventually the deadly boot sector virus gets booted automatically. This result that once the boot virus code on the drive is infected, the virus will be loaded into memory on every startup. The virus then can spread to every disk on that system.

Since most antivirus and other security softwares cannot read and clean the MBR, the boot sector viruses are usually very difficult to remove. Most common boot sector viruses include Monkey, NYB or B1, Stoned, and Form.

Data disappearance from entire partitions or disks is one of the most frequent problems that Boot sector virus causes. Finally, the system becomes unstable. Often the infected computer fails to start up or to find the hard drive. Also, error messages such as "Invalid system disk" may become prevalent.

Sometimes, behaviours shown by autorun.exe virus are also in similar malfunctioning association with boot sector virus.

Precautions and damage control

> The best protection against boot sector viruses is the same as against viruses in general: a good antivirus program with up-to-date virus definitions. Antivirus programs do two key things:


> Scan for and remove viruses in files on disks, Monitor the operation of your computer for virus-like activity and look for known actions of specific viruses or general suspicious activity.

> Back up your files, so that you can restore them if a virus damages them.

> Keep your original application and system disks locked (write-protected). This will prevent the virus from spreading to your original disks.

> If you must insert one of your application floppy disks into an unknown computer, lock it first. Unlock your application disk only after verifying that the computer is free of viruses.

> Obtain public-domain software from reputable sources. Don't download software directly to a hard disk. Rather, save it to a floppy disk, lock the floppy disk, and check it thoroughly using reputable virus detection software. Don't copy it to your hard disk until you know it is safe. This can also help protect you from Trojan horse programs.

> Quarantine any infected computer. If you discover that a computer is infected with a virus, immediately isolate it from other computers. In other words, disconnect it from any network it is on. Don't allow anyone to copy or move files from it until the entire system has been reliably disinfected.

Some of this information was adapted from an article in the UITS publication Computing Times Online.

How to change first desktop icon ?

 
Open your registry editor and create the key below.
 
Create a new DWORD value, called "SortOrderIndex" and set it according to the value data below.
 

System Key
[HKEY_CLASSES_ROOT\CLSID\{450D8FBA-AD25-11D0-98A8-0800361B1103}]
Value Name
SortOrderIndex
Data Type
REG_DWORD (DWORD Value)
Value Data
(0x48 = My Documents, 0x54 = My Computer)
 

Saturday, September 22, 2007

Making Desktop Changes Permanent

Making Desktop Changes Permanent

To make changes to the Desktop like window size, positon after rebooting:

  1. Start Regedit
  2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  3. Create a New Binary Value
  4. Name it NoSaveSettings
  5. Give it a value of 01 00 00 00

Adding the Control Panel to the Start Menu

  1. Open up the Explorer
  2. Go to \WINDOWS\Start Menu
  3. Right click in the right-hand panel
  4. Add a new folder
  5. Name it Control Panel.{21ec2020-3aea-1069-a2dd-08002b30309d}
  6. This makes getting to the Control Panel items a little easier

Wednesday, September 19, 2007

Removing Shortcut Arrows

An easy way to remove those irritating arrows from your desktop shortcut icons and not change their properties

  1. Right click the Desktop / Properties / Appearance tab
  2. Select Item
  3. Scroll for Icon
  4. The default size is 32
  5. Change this to 30
  6. Clicking Apply

Tuesday, September 18, 2007

Make Icons 256 Color 16-Bit

Make Icons 256 Color 16-Bit

  1. Open the Registry
  2. Hit Ctrl+F
  3. Type Shell Icon BPP
  4. When found, right click the Shell Icon BPP icon
  5. Click Modify
  6. Change the value from 4 to 16
  7. Click Ok
  8. Close the registry
  9. Restart your computer
 

Monday, September 10, 2007

Converting web pages or web site in Internet Explorer (Windows) to PDF files

This applies to a single web page or the entire website to convert or download to the PDF files. You can even specify the depth of the link penetration. This discussion is based on Adobe PDF Creator tool. Please, visit Adobe website for details.

Acrobat adds the Adobe PDF toolbar and Convert Current Web Page To An Adobe PDF File button to Internet Explorer 5.01 and later, which allow you to convert the currently displayed web page to an Adobe PDF file, or convert and perform an activity in one easy operation. You can convert more than one web page, even an entire website, to an Adobe PDF file directly within Adobe Acrobat.

The Internet Explorer Adobe PDF toolbar preferences determine only whether converted files open in Acrobat automatically, and whether you are prompted to confirm the deletion of files or addition of pages to an existing PDF file. The Acrobat web page conversion settings, which are available only in Acrobat, let you set more advanced settings, including the creation of bookmarks and tags. After you set the Acrobat web page conversion settings as desired, you need to use the Create PDF From Web Page feature in Acrobat at least once before the settings take effect in the Internet Explorer web page conversion feature. (See Specifying conversion settings for capturing web pages.)

When you convert a web page, you can also choose to do one of the following activities using a menu command:

> Add the converted web page to an existing PDF file.
> Print the page. A converted web page is reformatted to a standard page size with logical page breaks. This avoids inconsistent results in printing directly from a browser window.
> Email the page. Automatically open your email application with the converted web page attached.
> Initiate an email-based review. When you send an Adobe PDF document by email for review, reviewers receive the document as an email attachment. Recipients can add their comments to it and then send their comments to you.
> Display the Adobe PDF pane in the Internet Explorer window. This provides a convenient place for managing converted web pages. Folders and PDF files are organized under the root folder Desktop. You can navigate files and create, rename, and delete folders in this window, as well as rename and delete files. Only PDF files and folders containing PDF files are listed. In Windows XP, if you don't see the button in Internet Explorer, choose View > Toolbars > Adobe PDF.
 

Note: The files and folders displayed in the Adobe PDF pane are the same files and folders stored on your system. Only PDF files appear in the Adobe PDF pane; if you attempt to delete a folder that contains other files (files that are not visible in the Adobe PDF pane), you are asked to confirm the deletion.

 

Creating Adobe PDF files from downloaded web pages

An Adobe PDF file created from HTML pages is like any other PDF file. You can download and convert web pages by specifying a URL, by opening web pages from a link in an Adobe PDF file, and by dragging and dropping a web link or HTML file onto an Acrobat window icon. The web pages are converted to PDF and opened in the document pane. You can navigate through the file and add comments and other enhancements to it. Any links on the pages are still active in the PDF file--just click a link to download and convert the linked web pages, and add them to the end of the PDF file.
 

Note the following when converting web pages:
> Before converting a web page to an Adobe PDF file, be sure that you can access the Internet.
> You can download HTML pages, JPEG and GIF images (including the last frame of animated GIF images), text files, and image maps.
> One web page may correspond to more than one PDF page because long HTML pages are divided into standard-size pages (depending on the PDF page layout settings).
> HTML pages can include tables, links, frames, background colors, text colors, and forms. Cascading stylesheets and Macromedia® Flash™ are supported. HTML links turn into links, and HTML forms turn into PDF forms.
> The default/index.html frame downloads only once.
> You can determine whether to reference digital media components by URL, not include them, or embed the files where possible.
> Depending on the options selected when downloading and converting web pages, an Adobe PDF file created from web pages can display special tagged bookmarks that retain web information, such as the URLs for all links on the pages. Use these tagged bookmarks to navigate, reorganize, add, or delete pages in your PDF file. You can also add more tagged bookmarks to represent paragraphs, images, table cells, and other items on the pages. For information on using these tagged bookmarks, see Extracting, moving, and copying pages and Deleting and replacing pages.
> To convert Chinese, Japanese, and Korean (CJK) language web pages to PDF on a roman (Western) system in Windows, you must have installed the CJK language support files while installing Acrobat. (Also, it is preferable to select an appropriate encoding from the HTML conversion settings.)

Note: In Windows, if you try to open a PDF file that uses double-byte fonts and you don't have the necessary fonts installed, Acrobat asks if you want to install the necessary fonts kit.

Subscribe to geeklog feed Bookmark and Share

Design by Free blogger template